The 10 Best Chain Saws Offers in UK - May 2024

Starting a chainsaw may seem like a straightforward task, but it can be dangerous if not done correctly. It is essential to follow the manufacturer's instructions carefully and take the necessary safety precautions. Here are some steps to help you start a chainsaw safely.

Step 1: Put on protective gear
Before starting a chainsaw, it is essential to wear appropriate protective gear. This includes eye and ear protection, gloves, boots, and a helmet. The protective gear will help prevent any debris from injuring you.

Step 2: Check the chainsaw
Before starting a chainsaw, inspect it for any damages or issues that may prevent it from working correctly. Look for any loose or missing parts, faulty filters, or damaged cords. Make sure the oil and fuel reservoirs are full, and the chain is properly tightened.

Step 3: Position the chainsaw
Place the chainsaw on a flat surface and make sure it is stable. If the chainsaw is equipped with a throttle lock, engage it to prevent the chain from moving.

Step 4: Prime and choke the chainsaw
Most chainsaws have a primer bulb and a choke that needs to be activated before starting. Press the primer bulb several times to draw fuel into the carburetor and then turn on the choke.

Step 5: Pull the starter cord
Stand behind the chainsaw, place one foot on the rear handle, and firmly grip the front handle with one hand. Use the other hand to pull the starter cord slowly until you feel some resistance, and then pull it quickly and firmly to start the chainsaw.

Step 6: Warm up the chainsaw
Once the chainsaw starts, let it run for a few minutes to warm up. Disengage the choke and let the chainsaw idle for a few seconds before using it.

In conclusion, starting a chainsaw requires concentration, skill, and the correct protective gear. Follow the manufacturer's instructions, perform a safety check, and take the necessary precautions before starting a chainsaw. By doing so, you can operate the chainsaw safely and prevent any accidents or injuries.

When it comes to using a chain saw, one of the important factors you need to consider is the type of fuel you use. There are a few options available, but it’s essential to choose the correct one to ensure the smooth, safe, and efficient functioning of your saw.

Firstly, gasoline is the most commonly used fuel for chainsaws. However, it is essential to use the right kind of gasoline. Typical automotive gasoline contains up to 10% ethanol, which can cause clogging in the carburetor of the saw. Therefore, it is best to use ethanol-free gasoline or high-octane gasoline that has low ethanol content to prevent any issues.

Secondly, you can also use pre-mixed fuel specifically designed for two-stroke engines. This gasoline contains oil and already has the correct fuel-to-oil ratio, simplifying the refueling process. Pre-mixed fuel is convenient for those who don't want to deal with the hassle of mixing the gasoline with oil themselves.

Thirdly, electric chainsaws do not require gasoline. They are powered by electricity and can be beneficial if you have an outlet nearby. Electric chainsaws are relatively easy to use and maintain, require less maintenance than gasoline-powered saws, and have little to no emissions.

Lastly, biofuels such as biodiesel and ethanol can be used for chainsaws, but they require additional preparation and modification of the engine. These biofuels have different properties than traditional gasoline and require heavier-duty engine components to run efficiently.

In conclusion, choosing the correct fuel for your chainsaw is pivotal to its performance and durability. You can opt for standard gasoline, pre-mixed fuel, or electric power, depending on your preferences and the type of saw you have. Ensure you read the manufacturer’s guidelines before using any fuel to prevent damage to the chainsaw engine.

Sharp chains are crucial when it comes to efficient and safe chainsaw operation. Over time, a chain's cutting teeth can become dull, reducing the chainsaw's efficiency and increasing the risk of kickback. Sharpening your chainsaw chain at regular intervals is essential to keep your saw in top condition. Below is a step-by-step guide to sharpen a chainsaw chain.

1. Secure the Chainsaw

Before you begin sharpening the chain, it is vital to ensure that the chainsaw is switched off and that the spark plug is disconnected. Secure the chainsaw onto a stable work surface using a clamp or vise. This will prevent the chainsaw from moving during the sharpening process.

2. Identify the Tooth Angle

Locate the cutting direction angle of the chain's teeth. This angle is usually 30 to 35 degrees. You can find this information in your chainsaw manual or by contacting the manufacturer.

3. Secure the File Guide

A file guide will help you to maintain the correct tooth angle and depth when sharpening the chain. Position the file guide on the chain and insert the file into the guide. The file guide will hold the file at the correct position for filing the teeth.

4. Sharpen the Chain Teeth

Starting with the first tooth, file each tooth with a forward stroke from the inside out. Keep the file level with the top of the tooth and maintain the cutting angle by guiding the file using the file guide. Do the same pressure for each tooth to maintain the same tooth height.

5. Check the Chain Tooth Depth

After sharpening, inspect the chain teeth for even heights and equal angles. Each tooth needs to be at the same height, and the angled faces should be identical. If the teeth are not even, you may need to file again until the teeth are uniform.

6. Test the Chain

Once you finish sharpening the chain, you can reconnect the spark plug, and then test the chain's sharpness on a test log. If the chain is still dull, you may need to use a chainsaw sharpener or take it to a professional for sharpening.

In conclusion, sharpening a chainsaw chain is a relatively simple process that can extend the life of your chainsaw. However, it is important to follow the manufacturer's instructions and take proper safety precautions when sharpening the chain. With regular maintenance, your chainsaw will operate safely and efficiently.

Choosing the right chain saw for cutting firewood is crucial for safety, efficiency, and productivity. There are many different types and brands of chain saws on the market, but not all of them are suitable for cutting firewood. In this article, we will guide you through the factors to consider when selecting the best chain saw for cutting firewood.

Firstly, the power source of the chain saw is an important consideration. Gas-powered chain saws are typically more powerful than their electric counterparts. They are also more portable, making them an excellent choice for cutting firewood in remote areas. However, gas-powered chain saws require more maintenance, and they can be more expensive than electric ones.

Secondly, the length of the guide bar is another crucial factor to consider. The longer the guide bar, the more wood you can cut in a single pass. However, longer guide bars can also be more challenging to control, especially for novice users. A guide bar length of between 16 and 20 inches is generally recommended for cutting firewood.

Thirdly, the weight and ergonomics of the chain saw are also essential factors. A heavy chain saw can cause fatigue and discomfort, reducing productivity, and potentially compromising safety. A lightweight, well-balanced chain saw with comfortable handles can reduce operator fatigue and increase efficiency.

Fourthly, the chain speed and chain pitch are also crucial factors to consider. A chain saw with a higher chain speed can cut through wood faster, while a smaller chain pitch provides a smoother and more controlled cut. A chain saw with an adjustable chain oiler can also prolong the life of the chain.

Finally, the safety features of the chain saw are essential. A chain brake is an imperative safety feature that stops the chain saw in case of kickbacks or other emergencies. Other safety features to look for include anti-vibration handles, chain catchers, and throttle interlocks.

In conclusion, choosing the best chain saw for cutting firewood requires careful consideration of factors such as power source, guide bar length, weight and ergonomics, chain speed and pitch, and safety features. By selecting the right chain saw, you can ensure efficient and safe cutting of firewood, making your next camping trip or winter heating season a success.

As a chainsaw owner, one of the routine maintenance tasks you must perform is adjusting the chain tension. Chainsaw chains tend to loosen over time due to use, making it necessary for you to adjust them to maintain the saw's cutting efficiency and reduce the risk of accidents.

To adjust the chain tension, start by turning off the saw and unplugging it. You'll then need to loosen the nuts that hold the chainsaw's side cover in place using a wrench. Remove the side cover by pulling it away from the chainsaw's body.

Next, locate the screw that controls the chainsaw chain tension. Use a screwdriver to turn the screw clockwise to tighten the chain and counterclockwise to loosen it. Remember to check the saw's user manual to know the correct tension for your chainsaw chain.

Once the chain is appropriately tensioned, replace the chainsaw's side cover and tighten the nuts with the wrench. Remember not to overtighten the nuts as it can damage the chainsaw's body.

Finally, test the chain tension by pulling it away from the bar. The chain should have just enough slack, enabling it to move freely along the bar's guide grooves without sagging excessively. A well-tensioned chainsaw chain will also produce less noise and vibrations, making your cutting tasks more comfortable.

In conclusion, adjusting chainsaw chain tension is an essential maintenance task that ensures the saw's safe and efficient operation. By following the above steps, you can confidently adjust your chainsaw chain tension and enjoy a productive and safe cutting experience. Remember also to seek professional help if your chainsaw has multiple issues that require expert attention.

Using a chainsaw in the rain can be potentially dangerous if not done properly. It is advisable to use caution and take necessary precautions when using a chainsaw in wet weather conditions. Neglecting safety measures can lead to severe accidents, posing a threat to both life and property.

One of the main concerns when using a chainsaw in the rain is the potential for electric shock. Electrical equipment and water do not mix well, and this can result in electrocution. It is, therefore, crucial to make sure the chainsaw is correctly insulated, and all electrical connections are well protected from contact with water.

Another safety consideration when using a chainsaw in the rain is reduced visibility. Heavy rain can make it challenging to see the cutting line, which can lead to inaccurate cuts and accidents. It is essential to wear adequate protective gear, including a full-face helmet, goggles, and waterproof clothing, to minimize the risk of injuries due to reduced visibility.

One way to minimize the risk of accidents when using a chainsaw in the rain is to ensure the chain is well lubricated before starting. This ensures that the chain runs smoothly and reduces the potential for the chainsaw's bar to get bogged down in wet debris. Additionally, it is crucial to keep the chainsaw's air filters clean and dry to ensure optimal performance.

Finally, it is advisable to use a chainsaw with a smaller bar when working in wet conditions. This helps to reduce fatigue and improves the chainsaw's maneuverability, making it easier to handle. It is also important to maintain a secure grip and proper posture when working in wet conditions to avoid slipping and losing control of the chainsaw.

In conclusion, using a chainsaw in the rain can be done safely with the right precautions. However, it is essential to prioritize safety and take necessary measures to minimize the risk of accidents. Insulate the chainsaw correctly, wear appropriate protective gear, keep the chain lubricated, and use a smaller bar to ensure optimal performance when using a chainsaw in the rain.

When using a chainsaw, it's essential to wear proper safety gear to protect yourself from accidents. Chainsaws can be dangerous if not used properly. Here are some of the safety gear that you should wear when using a chainsaw.

1. Chainsaw Helmet: A chainsaw helmet is an essential piece of safety gear that you should wear when using a chainsaw. It protects your head from flying debris and can prevent serious head injuries. The helmet should fit snugly and have ear muffs and a face shield. It should meet safety standards set by the relevant authorities.

2. Chainsaw Gloves: Thick gloves are important to protect your hands from getting injured by the chainsaw. The gloves should be made of a material that is resistant to cuts and should provide a good grip on the chainsaw.

3. Chainsaw Chaps: Chainsaw chaps are specially designed pants that protect your legs from the chainsaw. They are made of multiple layers of Kevlar or other cut-resistant material. They offer the user the needed mobility while working but at the same time protect them from potential injuries.

4. Eye and Ear Protection: Eye and ear protection are very important when using a chainsaw. It is necessary to wear safety glasses or goggles to protect your eyes from debris and twigs. Also, earplugs or earmuffs are required to cancel out the noise that can damage hearing.

5. Steel-Toed Boots: Chainsaws are heavy and can cause serious injuries to your feet if they fall on them. Steel-toed boots are good to make sure your feet are protected from injuries from the chainsaw or falling branches.

6. High visibility vest or shirt: When working in a forest or an area with low visibility, it is essential to wear a high visibility shirt or vest to warn others of your presence. This is very important to ensure that you stay safe while working with machines that can cause serious injuries.

In conclusion, chainsaws can be dangerous machines when not used properly. By wearing the right protective gear, you can prevent serious injuries while working with chainsaws. Make sure that the gear you wear is of good quality and has been tested to meet the appropriate safety standards. Wear the recommended protective gear and always make sure you are working within your abilities and skill level.

The longevity of a chain saw chain depends on several factors, such as usage, maintenance, and the quality of the chain itself. A well-maintained chain saw chain should provide a long service life, but even with proper maintenance, it will eventually wear down and require replacement.

The frequency of use is a crucial factor in determining the lifespan of a chain saw chain. A professional logger who runs their chainsaw daily will wear out their chains quicker than someone who only uses it occasionally for yard work or firewood collection. Heavy usage can cause the chain's teeth to wear down faster, reducing its cutting effectiveness.

Proper maintenance can also extend the life of a chain saw chain. Regular cleaning and lubrication of the chain, as well as sharpening the teeth, will keep the chain in good working condition. A dull chain can lead to increased strain on the chainsaw's motor and can result in a shorter lifespan for both the chain and the tool itself.

The type of chain also plays a role in its longevity. Higher quality chains made of durable materials will last longer and hold up to heavy use better than lower-quality chains. However, they also tend to be more expensive. Cheaper, lower-quality chains may not last as long but are more cost-effective.

In general, a well-maintained chain saw chain can last anywhere from several months to several years. It ultimately depends on the factors mentioned above, including usage, maintenance, and quality of the chain. Keeping the chain clean, lubricated, and sharpened will help maximize its life while reducing wear and tear on the chainsaw. Investing in a higher quality chain will also provide a longer service life and ultimately save money in the long run.

As the off-season for yard work approaches, it's important to consider how to properly store your chainsaw to ensure it stays in optimal condition until needed again. Here are some tips for storing your chainsaw over the off-season:

Firstly, it’s important to properly clean your chainsaw prior to storing it. Make sure to remove any dirt or debris from the saw to prevent rust from forming. Also, clean the air filter and carburetor to remove any debris that may have accumulated during use.

Once you have thoroughly cleaned the saw, it’s time to drain the fuel from the chainsaw. It’s important to store the chainsaw with an empty fuel tank to prevent the fuel from becoming stale and causing damage to the carburetor.

Next, you’ll want to store the chainsaw in a cool, dry place. Moisture can cause rust to form on the chainsaw, and extreme temperatures can cause the oil in the chainsaw to become too thick or too thin.

To further protect your chainsaw from moisture, consider storing it in a box or case that is designed for chainsaw storage. These boxes or cases can also help protect your chainsaw from potential damage from falling objects or accidental bumps.

Lastly, it’s important to give your chainsaw a quick checkup before using it again. Make sure the guide bar and chain are properly lubricated, and that the spark plug is clean and properly gapped. This will ensure your chainsaw is ready to use when you need it.

In conclusion, storing your chainsaw properly during the off-season is essential for keeping it in good condition and extending its lifespan. Properly cleaning the saw, draining the fuel, storing it in a cool, dry place in a box or case, and performing a quick checkup before use are all important steps to ensure your chainsaw is ready to tackle any job when you are.

A gas chainsaw is powered by a gasoline engine, while an electric chainsaw is powered by electricity from a plugged-in power source or a battery. The main advantage of gas chainsaws is their power. They offer higher cutting speeds and can handle tougher jobs. They are also more portable and don't require a nearby power source. However, they require more maintenance and are noisier and emit fumes.

On the other hand, electric chainsaws are quieter, require less maintenance, emit no fumes, and are lighter and easier to handle. They are ideal for light to medium cutting tasks such as pruning, trimming, and cutting smaller trees. They are also more affordable and environmentally friendly. However, they have lower cutting speeds and may not be suitable for larger cutting jobs or remote locations without access to electricity.

Another important factor to consider is safety. Gas chainsaws have more kickback, which can be dangerous, especially for inexperienced users. Electric chainsaws have less kickback, making them safer to use. They also have safety features such as a chain brake and a lockout switch that prevents accidental activation.

Maintenance is also an important aspect to consider. Gas chainsaws require more frequent maintenance, such as oil changes, air filter cleaning, and chain sharpening. Electric chainsaws require less maintenance, and the chain can be easily replaced without the need for tools.

In conclusion, both gas and electric chainsaws have their advantages and disadvantages. The choice ultimately comes down to the intended use and personal preferences. If you need a powerful chainsaw for heavy-duty tasks and don't mind the maintenance and noise, a gas chainsaw may be the way to go. However, if you need a lighter, quieter, and more environmentally friendly option for light to medium cutting tasks, an electric chainsaw may be the better choice.